| DESCRIPTION | UNIT | CPS230 Axis | |||
| International Size Rating | |||||
| INJECTION UNIT | UNIT | A | B | A | B |
| Screw diameter | mm | 32 | 40 | 32 | 40 |
| Screw L:D ratio | l/d | 22.5 | 20 | 22.5 | 20 |
| Shot volume | cm³ | 141 | 220 | 141 | 220 |
| Shot weight(PS) | g | 128 | 200 | 128 | 200 |
| oz | 4.5 | 7.1 | 4.5 | 7.1 | |
| Injection pressure | bar | 2640 | 1690 | 2640 | 1690 |
| Injection rate | cm³/s | 83 | 129 | 83 | 129 |
| Plasticizing capacity | g/s | 12 | 18 | 12 | 18 |
| Injection stroke | mm | 175 | 175 | 175 | 175 |
| Injection speed | mm/s | 103 | 103 | 103 | 103 |
| Max.screw speed | r/min | 221 | 221 | 221 | 221 |
| CLAMPING UNIT | |||||
| Clamping force | kn | 2300 | |||
| Opening stroke | mm | 475 | |||
| Space between tie bars | mm | 520x520 | |||
| Max.mold height | mm | 530 | |||
| Min.mold height | mm | 200 | |||
| Ejector stroke | mm | 80 | |||
| Ejector stroke | kn | 140 | |||
| Number of ejector | pcs | 1x2 | |||
| Distance Berrel Centers | mm | 300 | |||
| POWER UNIT | |||||
| Maximum oil pump pressure | bar | 160 | |||
| Pump motor | kW | 14 | 14 | ||
| Heating capacity | kW | 6.8 | 6.8 | 6.8 | 6.8 |
| Number of temp zones | 2*4 | ||||
| GENERAL | |||||
| Oil tank capacity | l | 460 | |||
| Machine dimension(L×W×H) | m | 5.68x1.53x2.14 | |||
| Machine weight | t | 7 | |||
| Hopper capacity | kg | 25 | 25 | ||
Template plane diagram
