| DESCRIPTION | Cheetah 330Plus | |
| Injection Unit | ||
| Screw Diameter | mm | 55 |
| Screw L/D Ratio | l/d | 22.9 |
| Shot Volume | cm3 | 641 |
| Injection Weight(PS) | g | 583 |
| Injection Rate | cm3/s | 1400 |
| Injection Pressure | mpa | 169 |
| Screw Speed | rpm | 0-400 |
| Clamping Unit | ||
| Clamping force | kn | 3300 |
| Toggle Stroke | mm | 600 |
| Space Between Tie-Bars（WxH） | mm | 625x625 |
| Max. Mold Height | mm | 680 |
| Min. Mold Height | mm | 330 |
| Ejector Stroke | mm | 95 |
| Ejector Tonnage | kn | 70 |
| Others | ||
| Max. Pump Pressure | mpa | 16 |
| Motor Power | kW | 44+23 |
| Heater Power | kW | 20.6 |
| Machine Dimension | m | 7.55x2.0x2.34 |
| Oil Tank Capacity | L | 1300 |
| Machine Weight | ton | 13.5 |
