| DESCRIPTION | UNIT | CPS280 | |||
| International Size Rating | |||||
| INJECTION UNIT | UNIT | A | B | A | B |
| Screw diameter | mm | 28 | 32 | 32 | 40 |
| Screw L:D ratio | l/d | 22.5 | 22.5 | 22.5 | 20 |
| Shot volume | cm³ | 108 | 141 | 141 | 219 |
| Shot weight(PS) | g | 98 | 128 | 128 | 199 |
| oz | 3.5 | 4.5 | 4.5 | 7.0 | |
| Injection pressure | bar | 2699 | 2066 | 2066 | 1322 |
| Injection rate | cm³/s | 99 | 121 | 121 | 112 |
| Plasticizing capacity | g/s | 11 | 12 | 12 | 18 |
| Injection stroke | mm | 175 | 175 | 175 | 175 |
| Injection speed | mm/s | 150 | 150 | 150 | 150 |
| Max.screw speed | r/min | 250 | 250 | 250 | 250 |
| CLAMPING UNIT | |||||
| Clamping force | kn | 2800 | |||
| Opening stroke | mm | 460 | |||
| Space between tie bars | mm | 910x570 | |||
| Max.mold height | mm | 600 | |||
| Min.mold height | mm | 200 | |||
| Rotary Table Diameter | mm | 1000 | |||
| Ejector stroke | mm | 140 | |||
| Ejector force | kn | 53x2 | |||
| Number of ejector | pcs | 3x2 | |||
| Distance Berrel Centers | mm | 500 | |||
| POWER UNIT | |||||
| Maximum oil pump pressure | bar | 160 | |||
| Pump motor | kW | 18.2 | 18.2 | ||
| Heating capacity | kW | 6.8 | 6.8 | 6.8 | 6.8 |
| Number of temp zones | 2x4 | ||||
| GENERAL | |||||
| Oil tank capacity | l | 460 | |||
| Machine dimension(L×W×H) | m | 5.9X2.08X2.1 | |||
| Machine weight | t | 12 | |||
| Hopper capacity | kg | 25 | 25 | ||
Template plane diagram
