| SPECIFICATION | CN | CS128 | |||
| International standard injection volume VB | cm³ | 400 | |||
| INJECTION UNIT | A | B | C | ||
| Screw Diameter | mm | 38 | 42 | 45 | |
| Screw L/D Ratio | L/D | 21 | 19 | 18 | |
| Shot Volume | cm³ | 192 | 235 | 270 | |
| Injection Weight(PS) | g | 175 | 214 | 246 | |
| Injection Rate | cm³ /s | 108 | 130 | 138 | |
| Injection Pressure | Mpa | 186 | 158 | 135 | |
| Screw Speed | rpm | 220 | |||
| CLAMPING UNIT | |||||
| Clamping force | KN | 1280 | |||
| Toggle Stroke | mm | 360 | |||
| Space Between Tie-Bars(WxH) | mm | 410x410 | |||
| Max. Mold Height | mm | 400 | |||
| Min. Mold Height | mm | 160 | |||
| Ejector Stroke | mm | 120 | |||
| Ejector Tonnage | KN | 30 | |||
| OTHERS | |||||
| Max. Pump Pressure | Mpa | 16 | |||
| Motor Power | kW | 14 | |||
| Heater Power | kW | 7.55 | |||
| Machine Dimension | m | 4.4x1.40x1.80 | |||
| Oil Tank Capacity | L | 220 | |||
| Machine Weight | ton | 3.8 | |||
PLATEN DIMENSIONS
