| SPECIFICATION | CN | K-TEC140 | ||
| VB | cm³ | 473 | ||
| INJECTION UNIT | A | B | C | |
| Screw Diameter | mm | 38 | 42 | 45 |
| Screw L/D Ratio | l/d | 22.1 | 20 | 18.7 |
| Shot Volume | cm³ | 226 | 277 | 318 |
| Injection Weight(PS) | g | 206 | 252 | 289 |
| Injection Rate | cm³/s | 94 | 115 | 132 |
| Injection Pressure | mpa | 209 | 171 | 149 |
| Screw Speed | rpm | 220 | ||
| CLAMPING UNIT | ||||
| Clamping force | kn | 1400 | ||
| Toggle Stroke | mm | 380 | ||
| Space Between Tie-Bars（WxH） | mm | 420x420 | ||
| Max. Mold Height | mm | 450 | ||
| Min. Mold Height | mm | 160 | ||
| Ejector Stroke | mm | 120 | ||
| Ejector Tonnage | kn | 50 | ||
| OTHERS | ||||
| Max. Pump Pressure | mpa | 16 | ||
| Motor Power | kW | 14 | ||
| Heater Power | kW | 9.3 | ||
| Machine Dimension | m | 4.48x1.33x1.90 | ||
| Oil Tank Capacity | L | 270 | ||
| Machine Weight | ton | 4.3 | ||
Planten dimensions
