| SPECIFICATION | CN | K-TEC230 | ||
| VB | cm³ | 824 | ||
| INJECTION UNIT | A | B | C | |
| Screw Diameter | mm | 45 | 50 | 55 |
| Screw L/D Ratio | l/d | 23.4 | 21 | 19.1 |
| Shot Volume | cm³ | 397 | 490 | 593 |
| Injection Weight(PS) | g | 362 | 446 | 540 |
| Injection Rate | cm³/s | 124 | 154 | 186 |
| Injection Pressure | mpa | 207 | 168 | 138 |
| Screw Speed | rpm | 175 | ||
| CLAMPING UNIT | ||||
| Clamping force | kn | 2300 | ||
| Toggle Stroke | mm | 475 | ||
| Space Between Tie-Bars（WxH） | mm | 520x520 | ||
| Max. Mold Height | mm | 530 | ||
| Min. Mold Height | mm | 200 | ||
| Ejector Stroke | mm | 140 | ||
| Ejector Tonnage | kn | 70 | ||
| OTHERS | ||||
| Max. Pump Pressure | mpa | 16 | ||
| Motor Power | kW | 28 | ||
| Heater Power | kW | 14.8 | ||
| Machine Dimension | m | 5.58x1.50x2.14 | ||
| Oil Tank Capacity | L | 300 | ||
| Machine Weight | ton | 7 | ||
Planten dimensions
