| SPECIFICATION | CN | K-TEC270 | ||
| VB | cm³ | 1085 | ||
| INJECTION UNIT | A | B | C | |
| Screw Diameter | mm | 50 | 55 | 60 |
| Screw L/D Ratio | l/d | 25.2 | 22.9 | 21 |
| Shot Volume | cm³ | 530 | 641 | 763 |
| Injection Weight(PS) | g | 482 | 583 | 694 |
| Injection Rate | cm³/s | 187 | 227 | 270 |
| Injection Pressure | mpa | 205 | 169 | 142 |
| Screw Speed | rpm | 185 | ||
| CLAMPING UNIT | ||||
| Clamping force | kn | 2700 | ||
| Toggle Stroke | mm | 540 | ||
| Space Between Tie-Bars（WxH） | mm | 570x570 | ||
| Max. Mold Height | mm | 580 | ||
| Min. Mold Height | mm | 200 | ||
| Ejector Stroke | mm | 150 | ||
| Ejector Tonnage | kn | 70 | ||
| OTHERS | ||||
| Max. Pump Pressure | mpa | 16 | ||
| Motor Power | kW | 36 | ||
| Heater Power | kW | 16.8 | ||
| Machine Dimension | m | 6.0x1.60x2.25 | ||
| Oil Tank Capacity | L | 380 | ||
| Machine Weight | ton | 8.5 | ||
Planten dimensions
