| SPECIFICATION | CN | K-TEC120/U |
| INJECTION UNIT | ||
| Screw Diameter | mm | 42 |
| Shot Volume | cm³ | 135 |
| Injection Weight(PS) | g | 296 |
| Injection Rate | g/s | 128 |
| Injection Pressure | mpa | 158 |
| Screw Speed | rpm | 200 |
| CLAMPING UNIT | ||
| Clamping force | kn | 1200 |
| Toggle Stroke | mm | 360 |
| Space Between Tie-Bars（WxH） | mm*mm | 410 × 410 |
| Mold Height（Min~Max） | mm | 110~350 |
| Ejector Stroke | mm | 80 |
| Ejector Tonnage | kn | 30 |
| Number of strokes ejected | PC | 5 |
| OTHERS | ||
| Max. Pump Pressure | mpa | 16 |
| Motor Power | kW | 14 |
| Machine Dimension | L | 220 |
| Oil Tank Capacity | m*m*m | 4.4×1.2×1.8 |
| Machine Weight | T | 3.2 |
Template plane diagram
