| SPECIFICATION | CN | K-TEC180/U |
| INJECTION UNIT | ||
| Screw Diameter | mm | 55 |
| Shot Volume | cm³ | 510 |
| Injection Weight(PS) | g | 643 |
| Injection Rate | g/s | 196 |
| Injection Pressure | mpa | 138 |
| Screw Speed | rpm | 143 |
| CLAMPING UNIT | ||
| Clamping force | kn | 1800 |
| Toggle Stroke | mm | 435 |
| Space Between Tie-Bars（WxH） | mm*mm | 470 ×470 |
| Mold Height（Min~Max） | mm | 130~450 |
| Ejector Stroke | mm | 115 |
| Ejector Tonnage | kn | 50 |
| Number of strokes ejected |
PC |
5 |
| OTHERS | ||
| Max. Pump Pressure | mpa | 16 |
| Motor Power | kW | 21 |
| Machine Dimension | L | 230 |
| Oil Tank Capacity | m*m*m | 5.18x1.40x2.12 |
| Machine Weight | T | 6 |
Template plane diagram
