| SPECIFICATION | CN | K-TEC230/U |
| INJECTION UNIT | ||
| Screw Diameter | mm | 60 |
| Shot Volume | cm³ | 763 |
| Injection Weight(PS) | g | 961 |
| Injection Rate | g/s | 227 |
| Injection Pressure | mpa | 158 |
| Screw Speed | rpm | 157 |
| CLAMPING UNIT | ||
| Clamping force | kn | 2300 |
| Toggle Stroke | mm | 475 |
| Space Between Tie-Bars（WxH） | mm*mm | 520 ×520 |
| Mold Height（Min~Max） | mm | 150~480 |
| Ejector Stroke | mm | 120 |
| Ejector Tonnage | kn | 70 |
| Number of strokes ejected |
PC |
9 |
| OTHERS | ||
| Max. Pump Pressure | mpa | 16 |
| Motor Power | kW | 28 |
| Machine Dimension | L | 290 |
| Oil Tank Capacity | m*m*m | 5.58x1.50x2.14 |
| Machine Weight | T | 7 |
Template plane diagram
