| SPECIFICATION | CN | K-TEC450/U |
| INJECTION UNIT | ||
| Screw Diameter | mm | 80 |
| Shot Volume | cm³ | 1960 |
| Injection Weight(PS) | g | 2470 |
| Injection Rate | g/s | 437 |
| Injection Pressure | mpa | 152 |
| Screw Speed | rpm | 150 |
| CLAMPING UNIT | ||
| Clamping force | kn | 4500 |
| Toggle Stroke | mm | 740 |
| Space Between Tie-Bars（WxH） | mm*mm | 760 ×730 |
| Mold Height（Min~Max） | mm | 230~730 |
| Ejector Stroke | mm | 180 |
| Ejector Tonnage | kn | 150 |
| Number of strokes ejected |
PC |
13 |
| OTHERS | ||
| Max. Pump Pressure | mpa | 16 |
| Motor Power | kW | 56 |
| Machine Dimension | L | 700 |
| Oil Tank Capacity | m*m*m | 7.84×1.88×2.41 |
| Machine Weight | T | 15.4 |
Template plane diagram
