| SPECIFICATION | CN | K-TEC310 | ||
| VB | cm³ | 1354 | ||
| INJECTION UNIT | A | B | C | |
| Screw Diameter | mm | 55 | 60 | 65 |
| Screw L/D Ratio | l/d | 22.9 | 21 | 19.4 |
| Shot Volume | cm³ | 677 | 805 | 945 |
| Injection Weight(PS) | g | 616 | 733 | 860 |
| Injection Rate | cm³/s | 223.5 | 266 | 312.2 |
| Injection Pressure | mpa | 200 | 168 | 143 |
| Screw Speed | rpm | 185 | ||
| CLAMPING UNIT | ||||
| Clamping force | kn | 3100 | ||
| Toggle Stroke | mm | 590 | ||
| Space Between Tie-Bars（WxH） | mm | 615x615 | ||
| Max. Mold Height | mm | 630 | ||
| Min. Mold Height | mm | 200 | ||
| Ejector Stroke | mm | 150 | ||
| Ejector Tonnage | kn | 90 | ||
| OTHERS | ||||
| Max. Pump Pressure | mpa | 16 | ||
| Motor Power | kW | 36 | ||
| Heater Power | kW | 18.3 | ||
| Machine Dimension | m | 6.2×1.66x2.3 | ||
| Oil Tank Capacity | L | 380 | ||
| Machine Weight | ton | 9 | ||
Planten dimensions
