| DESCRIPTION | UNIT | CPS400 | |||
| International Size Rating | |||||
| INJECTION UNIT | UNIT | A | B | A | B |
| Screw diameter | mm | 40 | 45 | 40 | 45 |
| Screw L:D ratio | l/d | 23 | 20.5 | 23 | 20.5 |
| Shot volume | cm³ | 283 | 358 | 283 | 358 |
| Shot weight(PS) | g | 257 | 326 | 257 | 326 |
| oz | 9.1 | 11.5 | 9.1 | 11.5 | |
| Injection pressure | bar | 1960 | 1549 | 1960 | 1549 |
| Injection rate | cm³/s | 171 | 216 | 171 | 216 |
| Plasticizing capacity | g/s | 29 | 29 | 29 | 29 |
| Injection stroke | mm | 225 | 225 | 225 | 225 |
| Injection speed | mm/s | 136 | 136 | 136 | 136 |
| Max.screw speed | r/min | 2500 | 250 | 250 | 250 |
| CLAMPING UNIT | |||||
| Clamping force | kn | 4000 | |||
| Opening stroke | mm | 600 | |||
| Space between tie bars | mm | 1100x610 | |||
| Max.mold height | mm | 700 | |||
| Min.mold height | mm | 220 | |||
| Rotary Table Diameter | mm | 1150 | |||
| Ejector stroke | mm | 140 | |||
| Ejector force | kn | 70x2 | |||
| Number of ejector | pcs | 5x2 | |||
| Distance Berrel Centers | mm | 560 | |||
| POWER UNIT | |||||
| Maximum oil pump pressure | bar | 160 | |||
| Pump motor | kW | 23 | 23 | ||
| Heating capacity | kW | 12.3 | 12.3 | 12.3 | 12.3 |
| Number of temp zones | 2x4 | ||||
| GENERAL | |||||
| Oil tank capacity | l | 650 | |||
| Machine dimension(L×W×H) | m | 6.8x2.37x2.3 | |||
| Machine weight | t | 20 | |||
| Hopper capacity | kg | 25 | 25 | ||
Template plane diagram
